Miscellaneous

How to Change a Simplicity Mower Tire

How to Change a Simplicity Mower Tire



We are searching data for your request:

Forums and discussions:
Manuals and reference books:
Data from registers:
Wait the end of the search in all databases.
Upon completion, a link will appear to access the found materials.

The Simplicity Manufacturing Company is an outdoor landscaping machine manufacturer located in Wisconsin, based in the town of Port Washington. Although they're durable, the tires do eventually wear out, especially those on the manufacturer's riding mowers. If you have to change the tires on a Simplicity riding mower, you can do so yourself in less than an hour.

Changing Front Tires

Place wood chocks around the back tires on the Simplicity riding mower to ensure it doesn't roll during the tire change.

Slide an automotive jack under the front axle and raise the front of the Simplicity mower approximately 6 inches off the ground.

Pry the grease cap off the tire, using a putty knife or flat-head screwdriver.

  • The Simplicity Manufacturing Company is an outdoor landscaping machine manufacturer located in Wisconsin, based in the town of Port Washington.
  • Place wood chocks around the back tires on the Simplicity riding mower to ensure it doesn't roll during the tire change.

Unfasten the collar bolt with a hex driver. Remove the wheel collar and pull the front tire off the Simplicity mower.

Put the new front tire on. Replace the wheel collar and hex bolt. Put the grease cap back on and lower the jack. Remove the chocks from the rear tire.

Changing Rear Tires

Chock the front tires to keep the Simplicity mower from rolling.

  • Unfasten the collar bolt with a hex driver.
  • Remove the wheel collar and pull the front tire off the Simplicity mower.

Slide an automotive jack under the rear axle and raise the jack about 6 inches.

Pull the cotter pin off the wheel, using needle-nose pliers.

Unfasten the mounting bolts with a socket wrench and pull off the rear tire.

Put the new rear tire on the Simplicity mower and fasten the mounting bolts with a socket wrench. Replace the cotter pin, then lower the mower to the ground. Remove the jack and tire chocks.

Remove A Tire From A Simplicity Riding Lawn Mower

Simplicity manufacturing boasts to have some of the highest quality mowers on the market. This may be the case, but every lawn mower experiences normal wear and tear--resulting in eventual maintenance and repair. One such type service that all mowers require at some point, replacement of a bad tire. Ensure the area around the axle will support the weight of the tracker when jacking it up. Do not jack up on the exhaust or fiberglass body parts. Jack the lawnmower up until the tire clears the ground. Remove the plastic dust cap from the center cap of the tire. A flat-head screwdriver, placed between the gap in the retaining ring and the axle, will allow the ring to pry off the end of the axle. Remove the retaining ring, and the flat-washer directly underneath it. Replace the tire with a new one, or have the existing tire repaired. Reinstall the new tire using the same hardware in the reverse order.

  • Slide an automotive jack under the rear axle and raise the jack about 6 inches.
  • Replace the cotter pin, then lower the mower to the ground.


Watch the video: Do-It-Yourself Tire Change (August 2022).