Collections

How to Get Rid of Underground Tree Stumps

How to Get Rid of Underground Tree Stumps


We are searching data for your request:

Forums and discussions:
Manuals and reference books:
Data from registers:
Wait the end of the search in all databases.
Upon completion, a link will appear to access the found materials.

When you remove a tree, a substantial root structure remains under the ground because of the extensive spreading of root masses. There are various methods to get rid of underground tree stumps. One of the easiest is to accelerate decomposition with chemicals. Stump remover products are available from nurseries and garden centers for as little as $5 and contain nitric acid, potassium nitrate or saltpeter and sulphuric acid.

Drill through dirt or mud, if necessary, to make vertical holes in the top of each underground tree stump. Use a one-inch drill bit to drill approximately one foot deep, so that the chemical can reach the inside of the stump.

  • When you remove a tree, a substantial root structure remains under the ground because of the extensive spreading of root masses.
  • Use a one-inch drill bit to drill approximately one foot deep, so that the chemical can reach the inside of the stump.

Make diagonal holes at a 45-degree angle if the top of the stump is at ground level and you can get to the top sides of the stump. This may require the scraping or digging of some of the soil around the stump, to gain better access.

Pour chemical stump killer into each hole. Follow the manufacturer's application instructions. Usually four ounces in each hole is recommended. Add water to each one to completely fill to the surface level.

Evaluate the stumps weekly. It will take several weeks for the chemicals to begin breaking down underground tree stumps. The wood will begin to soften and crumble.

  • Make diagonal holes at a 45-degree angle if the top of the stump is at ground level and you can get to the top sides of the stump.

Break apart the underground tree stumps once they get soft enough. Use a shovel or axe to lift up pieces of the stumps, and discard them.

Add more of the chemical stump removal product if some sections of the underground tree stumps are stubborn. If the root system was extensive, one application may not be enough to completely break up a stump. Drill new holes in the remaining portions of the stump, and reapply the stump killer.

Fill the holes in the ground left behind with soil, and restore the grass or sod. It's common for the area to depress slightly over time, so mound the soil slightly to allow for this.

  • Break apart the underground tree stumps once they get soft enough.
  • Add more of the chemical stump removal product if some sections of the underground tree stumps are stubborn.

Wear gloves for safety when handling chemicals.

Keep children and pets away from tree stumps that have been treated with chemicals.


Watch the video: Remove tree stump with hi-lift jack (July 2022).


Comments:

  1. Larry

    Surely. I agree with all of the above-said. We can talk about this topic. Here, or in the afternoon.

  2. Tat

    At me a similar situation.Is ready to help.

  3. Accalon

    In my opinion, you are wrong. I'm sure. I can prove it.



Write a message